IS-MACHINE MANUFACTURING PROGRAMME

The high-performance 6 1/4” DG and 4 1/4” TG Heye IS-Machines are available for up to 24 sections.

According to the customers’ needs the machine can either be utilised for Blow & Blow, Press & Blow or for NNPB.

IS-Machines 6 1/4” DG, 4 1/4” TG

Depending on the equipment the dimensions can vary.

SERVICE REQUIREMENTS

Operating air supply must be clean, dry and oil-free
Operating air with constant pressure ± 0.02 bar
(0.3 psi)
Pilot air min. 0.5 bar (7.2 psi) in excess of operating air
Pilot air must be dry, clean and filtered by a microfog oiler at a constant pressure of
± 0.02 bar (0.3 psi)
Maximum temperature of compressed air 45°C Water hardness not more than 6°dH
(1°dH acc. to 0.1783 mmol/l HCO³)
Air of mould cooling must be clean and oil-free

The values stated refer to a 6 1/4” DG IS-Machine