- Home
-
Service
- Hot End
IS-MACHINE MANUFACTURING PROGRAMME
The high-performance 5” Heye IS-Machine is available for up to 24 sections in single or double gob operation.According to the customers’ needs the machine can either be utilised for Blow & Blow, Press & Blow or for NNPB.
IS-Machines 5” DG (SG)
Depending on the equipment the dimensions can vary.
SERVICE REQUIREMENTS
- Operating air supply must be clean, dry and oil-free
- Operating air with constant pressure ± 0.02 bar
- (0.3 psi)
- Pilot air min. 0.5 bar (7.2 psi) in excess of operating air
- Pilot air must be dry, clean and filtered by a microfog oiler at a constant pressure of ± 0.02 bar (0.3 psi)
- Maximum temperature of compressed air 45°C Water hardness not more than 6°dH (1°dH acc. to 0.1783 mmol/l HCO³)
- Air of mould cooling must be clean and oil-free
- Hot End